Hyundai Elantra Owners Manual
Hyundai Elantra: Checking tire inflation pressure
Your Hyundai Elantra’s fuse locations and assignments are listed here to help with troubleshooting and electrical repairs.
Check your tires once a month or more.
Also, check the tire pressure of the spare tire.
How to check
Use a good quality gage to check tire pressure.You can not tell if your tires are properly inflated simply by looking at them. Radial tires may look properly inflated even when they're underinflated.
Check the tire's inflation pressure when the tires are cold. - "Cold" means your vehicle has been sitting for at least three hours or driven no more than 1 mile (1.6 km).
Remove the valve cap from the tire valve stem. Press the tire gage firmly onto the valve to get a pressure measurement. If the cold tire inflation pressure matches the recommended pressure on the tire and loading information label, no further adjustment is necessary. If the pressure is low, add air until you reach the recommended amount.
If you overfill the tire, release air by pushing on the metal stem in the center of the tire valve. Recheck the tire pressure with the tire gage. Be sure to put the valve caps back on the valve stems. They help prevent leaks by keeping out dirt and moisture.
WARNING
- Inspect your tires frequently for proper inflation as well as wear and damage. Always use a tire pressure gauge.
- Tires with too much or too little pressure wear unevenly causing poor handling, loss of vehicle control, and sudden tire failure leading to accidents, injuries, and even death. The recommended cold tire pressure for your vehicle can be found in this manual and on the tire label located on the driver's side center pillar.
- Worn tires can cause accidents. Replace tires that are worn, show uneven wear, or are damaged.
- Remember to check the pressure of your spare tire. HYUNDAI recommends that you check the spare every time you check the pressure of the other tires on your vehicle.
Checking tire inflation pressure regularly helps prevent blowouts, extends tread life, and improves fuel efficiency. Visual inspection alone is unreliable—use a proper gauge to measure pressure when tires are cold. Even new tires lose air over time, making monthly checks important. Always replace valve caps after inspection to prevent leaks and keep out dirt. Inflate tires to the levels specified on the driver’s door label, not the sidewall. Both underinflated and overinflated tires affect steering, braking, and ride comfort. Spare tires often get overlooked—check them with the same diligence. Seasonal temperature changes may alter pressure, so adjust accordingly. Inspect treads during pressure checks for embedded debris or signs of wear. This simple task plays a big role in driving stability and tire longevity.
0.00904